Unconventional Breathing Currents Far beyond the Quantum Tunneling Distances in Large-Gapped Nanoplasmonic Systems.

Localized surface plasmon resonance (LSPR) in plasmonic nanoparticles propels the field of plasmo-electronics, holding promise for transformative optoelectronic devices through efficient light-to-current conversion. Plasmonic excitations strongly influence the charge distribution within nanoparticles, giving rise to electromagnetic fields that can significantly impact the macroscopic charge flows within the nanoparticle housing material. In this study, we present evidence of ultralow, unconventional breathing currents resulting from dynamic irradiance interactions between widely separated nanoparticles, extending far beyond conventional electron (quantum) tunneling distances. We develop an electric analogue model and derive an empirical expression to elucidate the generation of these unconventional breathing currents in cascaded nanoplasmonic systems under irradiance modulation. This technique and theoretical model have significant potential for applications requiring a deeper understanding of current dynamics, particularly on large nanostructured surfaces relevant to photocatalysis, energy harvesting, sensing, imaging, and the development of future photonic devices.

Development of an Optically Induced Dielectrophoresis (ODEP) Microfluidic System for High-Performance Isolation and Purification of Bacteria.

For the rapid detection of bacteria in a blood sample, nucleic acid amplification-based assays are believed to be promising. Nevertheless, the nucleic acids released from the dead blood cells or bacteria could affect the assay performance. This highlights the importance of the isolation of live bacteria from blood samples. To address this issue, this study proposes a two-step process. First, a blood sample was treated with the immuno-magnetic microbeads-based separation to remove the majority of blood cells. Second, an optically induced dielectrophoresis (ODEP) microfluidic system with an integrated dynamic circular light image array was utilized to further isolate and purify the live bacteria from the remaining blood cells based on their size difference. In this work, the ODEP microfluidic system was developed. Its performance for the isolation and purification of bacteria was evaluated. The results revealed that the method was able to harvest the live bacteria in a high purity (90.5~99.2%) manner. Overall, the proposed method was proven to be capable of isolating and purifying high-purity live bacteria without causing damage to the co-existing cells. This technical feature was found to be valuable for the subsequent nucleic-acid-based bacteria detection, in which the interferences caused by the nontarget nucleic acids could be eliminated.

The Utilization of Tunable Transducer Elements Formed by the Manipulation of Magnetic Beads with Different Sizes via Optically Induced Dielectrophoresis (ODEP) for High Signal-to-Noise Ratios (SNRs) and Multiplex Fluorescence-Based Biosensing Applications.

Magnetic beads improve biosensing performance by means of their small volume and controllability by magnetic force. In this study, a new technique composed of optically induced dielectrodphoresis (ODEP) manipulation and image processing was used to enhance the signal-to-noise ratio of the fluorescence for stained magnetic beads. According to natural advantages of size-dependent particle isolation by ODEP manipulation, biomarkers in clinical samples can be easily separated by different sizes of magnetic beads with corresponding captured antibodies, and rapidly distinguished by separated location of immunofluorescence. To verify the feasibility of the concept, magnetic beads with three different diameters, including 21.8, 8.7, and 4.2 µm, were easily separated and collected into specific patterns in the defined target zone treated as three dynamic transducer elements to evaluate fluorescence results. In magnetic beads with diameter of 4.2 µm, the lowest signal-to-noise ratio between stained and nonstained magnetic beads was 3.5. With the help of ODEP accumulation and detection threshold setting of 32, the signal-to-noise ratio was increased to 77.4, which makes this method more reliable. With the further optimization of specific antibodies immobilized on different-size magnetic beads in the future, this platform can be a potential candidate for a high-efficiency sensor array in clinical applications.

Nanohollow Titanium Oxide Structures on Ti/FTO Glass Formed by Step-Bias Anodic Oxidation for Photoelectrochemical Enhancement.

In this study, a new anodic oxidation with a step-bias increment is proposed to evaluate oxidized titanium (Ti) nanostructures on transparent fluorine-doped tin oxide (FTO) on glass. The optimal Ti thickness was determined to be 130 nm. Compared to the use of a conventional constant bias of 25 V, a bias ranging from 5 V to 20 V with a step size of 5 V for 3 min per period can be used to prepare a titanium oxide (TiOx) layer with nanohollows that shows a large increase in current of 142% under UV illumination provided by a 365 nm LED at a power of 83 mW. Based on AFM and SEM, the TiOx grains formed in the step-bias anodic oxidation were found to lead to nanohollow generation. Results obtained from EDS mapping, HR-TEM and XPS all verified the TiOx composition and supported nanohollow formation. The nanohollows formed in a thin TiOx layer can lead to a high surface roughness and photon absorbance for photocurrent generation. With this step-bias anodic oxidation methodology, TiOx with nanohollows can be obtained easily without any extra cost for realizing a high current under photoelectrochemical measurements that shows potential for electrochemical-based sensing applications.

Sintering Nano-Silver Paste by Resistive Joule Heating Process for 2G HTS Tape Joints.

Developing a joining technology for 2G HTS tapes without significantly reducing their superconducting property is crucial for numerous applications (MRI, motor/generator, power transmission, etc.). In this study, low sintering temperature (~230 °C) nano-silver paste was used as solder to join two 2G HTS tapes. In addition, two heating methods, i.e., furnace heating (heat flux outside-in) and resistive Joule heating (heat flux inside-out), were studied. This study indicates that the heat flux from internal by resistive Joule heating method shows less deteriorating impact to the 2G RE-Ba-Cu-O tape (RE: rare earth element) during the sintering process with the best specific resistance of 0.074 µΩ∙cm2 and Ic retention percentage of 99% (i.e., Ic reduced from 100 A before joining to 99 A after joining). This study indicates that nano-silver paste together with resistive Joule heating can possibly be used as soldering materials to join 2G HTS tapes.

Finite Element Analysis on Initial Crack Site of Porous Structure Fabricated by Electron Beam Additive Manufacturing.

Ti6Al4V specimens with porous structures can be fabricated by additive manufacturing to obtain the desired Young's modulus. Their mechanical strength and deformation behavior can be evaluated using finite element analysis (FEA), with various models and simulation methodologies described in the existing literature. Most studies focused on the evaluation accuracy of the mechanical strength and deformation behavior using complex models. This study presents a simple elastic model for brittle specimens followed by an electron beam additive manufacturing (EBAM) process to predict the initial crack site and threshold of applied stress related to the failure of cubic unit lattice structures. Six cubic lattice specimens with different porosities were fabricated by EBAM, and compression tests were performed and compared to the FEA results. In this study, two different types of deformation behavior were observed in the specimens with low and high porosities. The adopted elastic model and the threshold of applied stress calculated via FEA showed good capabilities for predicting the initial crack sites of these specimens. The methodology presented in this study should provide a simple yet accurate method to predict the fracture initiation of porous structure parts.

An integrated actuating and sensing system for light-addressable potentiometric sensor (LAPS) and light-actuated AC electroosmosis (LACE) operation.

To develop a lab on a chip (LOC) integrated with both sensor and actuator functions, a novel two-in-one system based on optical-driven manipulation and sensing in a microfluidics setup based on a hydrogenated amorphous silicon (a-Si:H) layer on an indium tin oxide/glass is first realized. A high-intensity discharge xenon lamp functioned as the light source, a chopper functioned as the modulated illumination for a certain frequency, and a self-designed optical path projected on the digital micromirror device controlled by the digital light processing module was established as the illumination input signal with the ability of dynamic movement of projected patterns. For light-addressable potentiometric sensor (LAPS) operation, alternating current (AC)-modulated illumination with a frequency of 800 Hz can be generated by the rotation speed of the chopper for photocurrent vs bias voltage characterization. The pH sensitivity, drift coefficient, and hysteresis width of the Si3N4 LAPS are 52.8 mV/pH, -3.2 mV/h, and 10.5 mV, respectively, which are comparable to the results from the conventional setup. With an identical two-in-one system, direct current illumination without chopper rotation and an AC bias voltage can be provided to an a-Si:H chip with a manipulation speed of 20 µm/s for magnetic beads with a diameter of 1 µm. The collection of magnetic beads by this light-actuated AC electroosmosis (LACE) operation at a frequency of 10 kHz can be easily realized. A fully customized design of an illumination path with less decay can be suggested to obtain a high efficiency of manipulation and a high signal-to-noise ratio of sensing. With this proposed setup, a potential LOC system based on LACE and LAPS is verified with the integration of a sensor and an actuator in a microfluidics setup for future point-of-care testing applications.

Flexible Textile-Based Pressure Sensing System Applied in the Operating Room for Pressure Injury Monitoring of Cardiac Operation Patients.

Pressure injury is the most important issue facing paralysis patients and the elderly, especially in long-term care or nursing. A new interfacial pressure sensing system combined with a flexible textile-based pressure sensor array and a real-time readout system improved by the Kalman filter is proposed to monitor interfacial pressure progress in the cardiac operation. With the design of the Kalman filter and parameter optimization, noise immunity can be improved by approximately 72%. Additionally, cardiac operation patients were selected to test this developed system for the direct correlation between pressure injury and interfacial pressure for the first time. The pressure progress of the operation time was recorded and presented with the visible data by time- and 2-dimension-dependent characteristics. In the data for 47 cardiac operation patients, an extreme body mass index (BMI) and significantly increased pressure after 2 h are the top 2 factors associated with the occurrence of pressure injury. This methodology can be used to prevent high interfacial pressure in high-risk patients before and during operation. It can be suggested that this system, integrated with air mattresses, can improve the quality of care and reduce the burden of the workforce and medical cost, especially for pressure injury.

Annealing effect on UV-illuminated recovery in gas response of graphene-based NO2 sensors.

The response and recovery of a graphene-based sensor for nitrogen dioxide (NO2) sensing is improved by a combination of two treatments including rapid thermal annealing (RTA) of graphene and UV illumination during the pump down period. A two-dimensional monolayer graphene grown by chemical vapor deposition was transferred to an arc-shape electrode and subsequently heated at temperatures from 200 to 400 °C for 1 min in N2 atmosphere by RTA to eliminate the chemical residues on the graphene generated in the transfer process. The effect of RTA and poly(methyl methacrylate) (PMMA) residues was investigated using Raman spectroscopy. The shift of the G and 2D bands could be due to graphene suffering from compressive strain and hole doping from the substrate enhanced by the RTA treatment. The hole doping effect was also observed from Hall measurements. Atomic force microscopy images confirm the PMMA residues and surface roughness reduction by the RTA treatment. Annealing at 300 °C enhances the NO2 sensing response at 1 ppm by 4 times compared to the pristine graphene without RTA. Full recovery of the sensor to the initial baseline could be achieved by the adjustment of UV illumination time.

Plasmonic nanomaterial structuring for SERS enhancement.

Unique structures of a gold island over nanospheres (AuIoN) featuring a three-dimensional (3D) nanostructure on a highly ordered two-dimensional (2D) array of nanospherical particles with different adhesion layers were fabricated as surface-enhanced Raman scattering (SERS) substrates. Ultra-thin Au was thermally evaporated onto PS nanospheres while aluminum oxide (Al2O3) was applied as an Au adhesion layer. The outcomes demonstrate that the higher metallic particle density and surface roughness supplied by the Al2O3 provided larger interatomic bonding than a conventional adhesion layer, the highly-dispersive Cr. Nanosphere lithography (NSL) to deposit templating particles as small as ∼100 nm successfully created a simple initial roughening process which in turn boosted the localized surface plasmon resonance (LSPR) efficiency. So far, PS template deposition of a size less than 200 nm has been challenging, but here, through the use of a simple solvent ratio adjustment on drop-casting NSL, the novelty of natural lithography with downscaled properties as an alternative to the complexity of photolithography which is mostly conducted in the strict ambience of a clean room, is presented. SERS activity was primarily attributed to the synergistic effect of collective LSPRs from the AuIoN structure reinforcing the electromagnetic field, particularly in the crevices of two neighboring AuIoNs, as simulated by FDTD (Finite-Difference Time-Domain) computation. An AuIoN fabricated by the integration of Al2O3 with thinner Au particles showed the optimum SERS activities with an improved enhancement factor of 1.51 × 106. Overall, a non-lithographic technique in tuning SERS hotspots and favorable characteristics of Al2O3 for ultra-thin Au adhesion support, which can potentially be used in the fabrication of various devices, was demonstrated.

N-Doped Graphene with Low Intrinsic Defect Densities via a Solid Source Doping Technique.

N-doped graphene with low intrinsic defect densities was obtained by combining a solid source doping technique and chemical vapor deposition (CVD). The solid source for N-doping was embedded into the copper substrate by NH3 plasma immersion. During the treatment, NH3 plasma radicals not only flattened the Cu substrate such that the root-mean-square roughness value gradually decreased from 51.9 nm to 15.5 nm but also enhanced the nitrogen content in the Cu substrate. The smooth surface of copper enables good control of graphene growth and the decoupling of height fluctuations and ripple effects, which compensate for the Coulomb scattering by nitrogen incorporation. On the other hand, the nitrogen atoms on the pre-treated Cu surface enable nitrogen incorporation with low defect densities, causing less damage to the graphene structure during the process. Most incorporated nitrogen atoms are found in the pyrrolic configuration, with the nitrogen fraction ranging from 1.64% to 3.05%, while the samples exhibit low defect densities, as revealed by Raman spectroscopy. In the top-gated graphene transistor measurement, N-doped graphene exhibits n-type behavior, and the obtained carrier mobilities are greater than 1100 cm²·V-1·s-1. In this study, an efficient and minimally damaging n-doping approach was proposed for graphene nanoelectronic applications.

Chinese Herbal Mixture, Tien-Hsien Liquid, Induces G2/M Cycle Arrest and Radiosensitivity in MCF-7 Human Breast Cancer Cells through Mechanisms Involving DNMT1 and Rad51 Downregulation.

The Chinese herbal mixture, Tien-Hsien Liquid (THL), has been proven to suppress the growth and invasiveness of cancer cells and is currently regarded as a complementary medicine for the treatment of cancer. Our previous study using acute promyelocytic leukemia cells uncovered its effect on the downregulation of DNA methyltransferase 1 (DNMT1) which is often overexpressed in cancer cells resulting in the repression of tumor suppressors via hypermethylation. Herein, we explored the effects of THL in MCF-7 breast cancer cells that also demonstrate elevated DNMT1. The results show that THL dose-dependently downregulated DNMT1 accompanied by the induction of tumor suppressors such as p21 and p15. THL arrested cell cycle in G2/M phase and decreased the protein levels of cyclin A, cyclin B1, phospho-pRb, and AKT. DNMT1 inhibition was previously reported to exert a radiosensitizing effect in cancer cells through the repression of DNA repair. We found that THL enhanced radiation-induced clonogenic cell death in MCF-7 cells and decreased the level of DNA double-strand break repair protein, Rad51. Our observations may be the result of DNMT1 downregulation. Due to the fact that DNMT1 inhibition is now a mainstream strategy for anticancer therapy, further clinical trials of THL to confirm its clinical efficacy are warranted.

Programming a nonvolatile memory-like sensor for KRAS gene sensing and signal enhancement.

A programmable field effect-based electrolyte-insulator-semiconductor (EIS) sensor constructed with a nonvolatile memory-like structure is proposed for KRAS gene DNA hybridization detection. This programmable EIS structure was fabricated with silicon oxide (SiO2)/silicon nitride (Si3N4)/silicon oxide on a p-type silicon wafer, namely electrolyte-oxide-nitride-oxide-Si (EONOS). In this research, voltage stress programming from 4 to 20V was applied to trigger holes confinement in the nitride-trapping layer that, consequently, enhances the DNA attachment onto the sensing surface due to additional electrostatic interaction. Not solely resulting from the higher DNA load, the programming may affect the orientation of the DNA that finally contributes to the change in capacitance. Findings have shown that a higher voltage program is able to increase the total capacitance and results in ~3.5- and ~5.5-times higher sensitivities for a series of concentrations for complementary DNA and wild type versus mutant DNA hybridization detection, respectively. Overall, it has been proven that the voltage program on the nonvolatile memory-like structure of EONOS is a notable candidate for genosensor development, scoping the diagnosis of a single nucleotide polymorphism (SNP)-related disease.

Prdm12 is induced by retinoic acid and exhibits anti-proliferative properties through the cell cycle modulation of P19 embryonic carcinoma cells.

The Prdm (PRDI-BF1-RIZ1 homologous) family is involved in cell differentiation, and several Prdms have been reported to methylate histone H3 by intrinsic or extrinsic pathways. Here, we report that Prdm12 recruits G9a to methylate histone H3 on lysine 9 through its zinc finger domains. Because of the expression of Prdm12 in the developmental nervous system, we investigated the role of Prdm12 on P19 embryonic carcinoma cells as a model system for neurogenesis. In P19 cells, Prdm12 is induced by Retinoic acid (RA). Overproduction of Prdm12 in P19 cells impairs cell proliferation and increases the G1 population accompanied by the upregulation of p27. In contrast, the knockdown of Prdm12 increases the number of cells in a suspension culture of RA-induced neural differentiation. Both the PR domain and zinc finger domains are required for the anti-proliferative activity of Prdm12. While the data in this study is based on in vitro models, the results suggest that Prdm12 is induced by the RA signaling in vivo, and may regulate neural differentiation during animal development.

Reducing fine particulate to improve health: a health impact assessment for Taiwan.

Recently various countries have adopted the new standards for PM(2.5) (particulate matter <2.5 µm in aerodynamic diameter), but Taiwan still maintains an old set of air quality guidelines for particulate matter; therefore, the authors quantified the public health impact of long-term exposure to PM(2.5) in terms of attributable number of deaths and the potential gain in life expectancy by reducing PM(2.5) annual levels to 25, 20, 15, and 10 µg/m(3). When the guideline for PM(2.5) long-term exposure was set at 25 µg/m(3), 3.3% of all-cause mortality or 4,500 deaths in 2009 could be prevented. The potential gain in life expectancy at age 30 of this reduction would increase by a range between 1 and 7 months in Taiwan. This study shows that guidelines for PM(2.5), especially for long-term exposure, should be adopted in Taiwan as soon as possible to protect public health.

Acute Myocardial Infarction in Association with Occult Ovarian Cancer.

UNLABELLED: Acute myocardial infarction is usually caused by rupture of an atheromatous plaque in the coronary arteries. For patients without risk factors of atherosclerosis, other causes should be considered. We report on a 47-year-old woman with acute myocardial infarction but no cardiovascular risk factors, which was followed by deep vein thrombosis one week after recovery from acute myocardial infarction. Although deep vein thrombosis may be medically addressed by prolonged bed rest or heart failure in patients with acute myocardial infarction, the clustering of these two diseases in patients without risk factors of atherosclerosis or venous thrombosis is unusual. In situ coronary thrombosis secondary to hypercoagulable state was presumed to be the cause for her myocardial infarction. Further investigation revealed hidden advanced ovarian cancer in the patient. This case should remind cardiologists that, for patients without clinical evidence of atherosclerosis, unusual underlying causes of acute myocardial infarction should be comprehensively investigated, such as malignancy-related hypercoagulable state. KEY WORDS: Deep vein thrombosis; Hypercoagulability; Myocardial infarction; Ovarian cancer; Trousseau's syndrome.

Immobilization of enzyme and antibody on ALD-HfO2-EIS structure by NH3 plasma treatment.

Thin hafnium oxide layers deposited by an atomic layer deposition system were investigated as the sensing membrane of the electrolyte-insulator-semiconductor structure. Moreover, a post-remote NH3 plasma treatment was proposed to replace the complicated silanization procedure for enzyme immobilization. Compared to conventional methods using chemical procedures, remote NH3 plasma treatment reduces the processing steps and time. The results exhibited that urea and antigen can be successfully detected, which indicated that the immobilization process is correct.

Optimization of urea-EnFET based on Ta2O5 layer with post annealing.

In this study, the urea-enzymatic field effect transistors (EnFETs) were investigated based on pH-ion sensitive field effect transistors (ISFETs) with tantalum pentoxide (Ta(2)O(5)) sensing membranes. In addition, a post N(2) annealing was used to improve the sensing properties. At first, the pH sensitivity, hysteresis, drift, and light induced drift of the ISFETs were evaluated. After the covalent bonding process and urease immobilization, the urea sensitivity of the EnFETs were also investigated and compared with the conventional Si(3)N(4) sensing layer. The ISFETs and EnFETs with annealed Ta(2)O(5) sensing membranes showed the best responses, including the highest pH sensitivity (56.9 mV/pH, from pH 2 to pH 12) and also corresponded to the highest urea sensitivity (61 mV/pC(urea), from 1 mM to 7.5 mM). Besides, the non-ideal factors of pH hysteresis, time drift, and light induced drift of the annealed samples were also lower than the controlled Ta(2)O(5) and Si(3)N(4) sensing membranes.

Targeting PML-RARα and Oncogenic Signaling Pathways by Chinese Herbal Mixture Tien-Hsien Liquid in Acute Promyelocytic Leukemia NB4 Cells.

Tien-Hsien Liquid (THL) is a Chinese herbal mixture that has been used worldwide as complementary treatment for cancer patients in the past decade. Recently, THL has been shown to induce apoptosis in various types of solid tumor cells in vitro. However, the underlying molecular mechanisms have not yet been well elucidated. In this study, we explored the effects of THL on acute promyelocytic leukemia (APL) NB4 cells, which could be effectively treated by some traditional Chinese remedies containing arsenic trioxide. The results showed THL could induce G2/M arrest and apoptosis in NB4 cells. Accordingly, the decrease of cyclin A and B1 were observed in THL-treated cells. The THL-induced apoptosis was accompanied with caspase-3 activation and decrease of PML-RARα fusion protein. Moreover, DNA methyltransferase 1 and oncogenic signaling pathways such as Akt/mTOR, Stat3 and ERK were also down-regulated by THL. By using ethyl acetate extraction and silica gel chromatography, an active fraction of THL named as EAS5 was isolated. At about 0.5-1% of the dose of THL, EAS5 appeared to have most of THL-induced multiple molecular targeting effects in NB4 cells. Based on the findings of these multi-targeting effects, THL might be regarding as a complementary and alternative therapeutic agent for refractory APL.

Optimization of a PVC Membrane for Reference Field Effect Transistors.

For the miniaturization of ISFET sensing systems, the concept of a REFET with low ion sensitivity is proposed to replace the conventional reference electrodes through the arrangement of a quasi reference electrode and a differential readout circuit. In this study, an ion-unblocking membrane was used as the top layer of a REFET. To optimize the REFET performance, the influences of the silylating process, different plasticizers, and the composition of the PVC cocktails were investigated. A low sensitivity (10.4 ± 2.2 mV/pH) and high linearity (99.7 ± 0.3 %) in the range from pH 2.2 to pH 11.6 was obtained for the REFET with a 60 wt.% DNP/(DNP + PVC) membrane. To evaluate the long term stability, the drift coefficient was estimated, and for the best REFET, it was -0.74 mV/h. Two criteria for assessing the lifetime of REFETs were used, namely the increase in pH sensitivity to a value higher than 15 mV/pH and the degradation of linearity below 99 %. For the best REFET, it was approximately 15 days.